This phase details the elements that are part of the threat modelling (based on the intelligence gathered and the pre-engagement information)
Following is an image depicting the main branches of the corresponding mindmap:
- 1 General
- 2 Business Asset Analysis
- 2.1 Organizational Data
- 2.2 Human Assets
- 3 Business Process Analysis
- 4 Threat Agents/Community Analysis
- 5 Threat Capability Analysis
- 6 Motivation Modeling
- 7 Finding relevant news of comparable Organizations being compromised
This section defines the required models needed for a correct execution of a penetration testing. The standard does not use a specific model, but instead requires that the model used be consistent in terms of its representation of threats, their capabilities, their qualifications as per the organization being tested, and the ability to repeatedly be applied to future tests with the same results. The standard focuses on two key elements of traditional threat modeling - business assets, and attacker. Each one is further broken down into the business assets themselves, and business processes, and from the attacker perspective, the threat community, and attacker capabilities. As a minimum, all four elements should be clearly identified and documented in every penetration test.
When modeling the attacker side, on top of the threat community (which is mostly semantic and can be tied back to the organization’s business SWOT analysis), and the capabilities (which is mostly technical), additional aspects of motivation modeling should also be provided. These additional points essentially take into account the value of the different assets available at the target and are combined with the cost of acquiring it. As a complementary model, impact modeling should also be performed for the organization in order to provide a more accurate view of the “what-if?” scenario surrounding the loss event of each of the identified assets. This should take into account the assets “net” value, its intrinsic value, and other indirectly incurred costs associated with a loss event.
High level threat modeling process
- Gather relevant documentation
- Identify and categorize primary and secondary assets
- Identify and categorize threats and threat communities
- Map threat communities against primary and secondary assets
Gather relevant documentation
You will need extensive documentation of the assessment scope, the organization and it’s most critical business processes in order to complete a relevant threat modeling exercise. The documents you may want to obtain include : - Policies, plans and procedures - Technical information - Infrastructure design information - System configuration information - Business processes information
In the light of a PTES assessment the internally hosted CRM application may be in scope. The customer information stored in the back-end database is an easily identifiable primary asset as it is directly linked to the application in scope. However, by reviewing the technical design of the database server, it can also be identified that the HR database stored on the same back-end database server is a secondary asset. An attacker can use the CRM application as a stepping stone to obtain employee information. In a basic threat modeling exercise, certain threat communities may be identified as not relevant when mapped to the CRM application, but by identifying the secondary assets the threat landscape suddenly changes.
Business Asset Analysis
The business asset analysis part of the threat model basically takes an asset centric view of all the related information assets, the business processes that surround/support them, the personnel involved with manipulating/processing/maintaining them, and the IT environment that hosts/protects/processes them.
In the business asset analysis phase, the penetration tester is tasked with finding which business asset are most likely to be sought after by an attacker, what is the direct worth of these assets are, and what are the intrinsic costs of such a loss. This part is concluded with an impact analysis for each of the assets initially identified. This analysis can be used, alongside the results from the full penetration test, in order to provide the organization a model on top of which it can build a more cohesive risk management strategy. The results of the penetration test should provide a fairly accurate estimate of the probability of such loss, and the different ways in which loss events would most likely occur.
Policies, Plans, and Procedures
Internal policies, plans, and procedures define how the organization does business. These documents are of particular interest as they can help identify key roles within an organization and critical business processes that keep a company running.
Product Information (e.g. trade secrets, R&D data)
Product related information includes any patents, trade secrets, future plans, source code, supporting systems that directly affect the product market value, algorithms, and any other information that the organization regards as a key factor to the business success of such product.
Marketing Information (plans, roadmaps, etc.)
Marketing plans for promotions, launches, product changes, positioning, partnerships, 3rd party providers, business plans related to activities inside or outside the organization. Additionally, PR related data such as details of partners, reporters, consulting firm, and any correspondence with such entities is also considered a highly sought after target.
Financial Information (e.g. bank, credit, equity accounts)
Financial information is often some of the most guarded information an organization possesses. This information can include bank account information, credit card account information and/or credit card numbers, and investment accounts, among others.
Technical information about the organization, and the organization’s operations, is of unique interest to the penetration tester. Such information is often not the expected deliverable of a penetration test, however, it facilitates the testing process by feeding valuable information to other areas; infrastructure design information may provide valuable data to the Intelligence Gathering process.
- Infrastructure Design Information
Infrastructure design related information pertains to all the core technologies and facilities used to run the organization. Building blueprints, technical wiring and connectivity diagrams, computing equipment/networking designs, and application level data processing are all considered infrastructure design information.
- System Configuration Information
System configuration information includes configuration baseline documentation, configuration checklists and hardening procedures, group policy information, operating system images, software inventories, etc. This information could aid the discovery of vulnerabilities (such as through the knowledge of configuration errors or outdated software installations).
- User Account Credentials
User account credentials help facilitate access to the information system, at a non-privileged level, as long as a means to authenticate exists (e.g. VPN, web portal, etc.).
- Privileged User Account Credentials
Privileged user account credentials help facilitate access to the information system, at an elevated level of access, as long as a means to authenticate exists (e.g. VPN, web portal, etc.). Obtaining privileged user account credentials often leads to compromise of the information system being tested.
Here employee data is being analyzed as any data that can have a DIRECT affect on the organization is obtained or compromised by an attacker. Organizations that have to adhere to some compliance which places fines on the loss or exposure of such data are obvious candidates for such a direct loss effect. Also, organizations who’s employees may be considered critical assets may also be subjected to such scrutiny (specific government bodies, specialized trade secret related employees/departments, etc…). The following list provides examples to information realms of personal data that may be considered business assets for the threat modeling.
- National Identification Numbers (SSNs, etc.)
- Personally Identifiable Information (PII)
- Protected Health Information (PHI)
- Financial Information (e.g. bank, credit accounts)
Much like employee data, customer data is considered a business asset in the threat modeling process when such information will incur a direct/indirect loss to the organization. On top of regulatory/compliance need (based on fines), an additional factor comes into play here when such data can be used to conduct fraud, where the organization may be held liable or sued for the losses related to the fraud (based on losing the customer information that enabled the fraud to take place). The following list provides examples of such information realms that may hold relevant customer data and should be considered business assets for the sake of the threat modeling
- National Identification Numbers (SSN’s, etc.)
- Personally Identifiable Information (PII)
- Protected Health Information (PHI)
- Financial Accounts (e.g. bank, credit, equity accounts)
- Supplier Data
Information related to suppliers that is considered critical to the organization (such as critical component manufacturers, agreements with suppliers that may be part of a trade secret, cost analysis of supplied components), as well as any data that may be used to affect the business operations of the organization through its suppliers is considered a business asset.
- Partner Data
- “Cloud” Service Account Information
When identifying human assets in an organization, we have to remember that the context is having such assets part of a greater effort to compromise the organization. As such, human assets that are identified as business assets are those that could be leveraged to divulge information, manipulated to make decisions or actions that would adversely affect the organization or enable an attacker to further compromise it. Human assets are not necessarily the highest up within the corporate hierarchy, but are more often key personnel that are related to previously identified business assets, or are in positions to enable access to such assets. This list can also include employees that normally would not be associated with access to restricted company assets, but may be in a position to grant physical access to a company that facilitates a breach of security or procedure. The following list provides some examples of such assets, and should be adapted to the organization being tested.
- Executive Management
- Executive Assistants
- Middle Management
- Administrative Assistants
- Technical/Team Leads
- Human Resources
Business Process Analysis
In the business process analysis we differentiate between critical business processes, and non-critical processes. For each category the analysis is the same, and takes into account the same elements. The main difference is in the weighting that the threat from a critical business process is assigned with as opposed to a non-critical one. Nevertheless, it's imperative to remember that an aggregation of a few non-critical business processes can be combined into a scenario that essentially forms a critical flaw within an element/process. Such threat scenarios should also be identified within this phase and mapped out for later use in the penetration test.
Technical infrastructure supporting process
As business processes are usually supported by IT infrastructure (such as computer networks, processing power, PCs for entering information and managing the business process, etc...), all those elements must be identified and mapped. Such mapping should be clear enough to be used later on in the process when translating the threat model to the vulnerability mapping and exploitation.
Information assets supporting process
Contrary to technical infrastructure, information assets are existing knowledge bases in the organization that are used as either a reference, or as support material (decision making, legal, marketing, etc...). Such assets are usually identified in the business process already, and should be mapped alongside the technical infrastructure, as well as any additional technical infrastructure that supports the information assets themselves.
Human assets supporting process
Identification of the HR that are involved in the business process should be made in conjunction with the process analysis itself (whether documented or not), and every person that has any kind of involvement (even if it does not relate to a specific information asset or a technical infrastructure element) should be documented and mapped in the process. Such HR assets are usually part of an approval sub-process, a verification sub-process, or even a reference (such as legal advice). These kinds of assets (especially ones that have no relation to information assets or technical infrastructure) would be later mapped to attack vectors that are more social than technical in nature.
3rd party integration and/or usage of/by process
Similar to human assets supporting the process, any 3rd party that has any involvement with the business process should be mapped as well. This category can be tricky to map out, as it could contain both human assets, as well as information/technical ones (such as a SaaS provider).
Threat Agents/Community Analysis
When defining the relevant threat communities and agents, a clear identification of the threat should be provided in terms of location (internal / external to the organization), the specific community within the location, and any additional relevant information that would assist in establishing a capabilities/motivation profile for the specific agent/community. Where possible, specific agents should be identified. Otherwise, a more general community should be outlined, along-with any supporting material and intelligence. Some examples of threat agent/community classifications are:
|Management (executive, middle)||Competitors|
|Administrators (network, system, server)||Contractors|
|Contractors (with their external users)||Hacktivists|
|General user community||Script Kiddies (recreational/random hacking)|
Threat Capability Analysis
Once a threat community has been identified, the capabilities of said community must also be analyzed in order to build an accurate threat model that reflects the actual probability of such a community/agent to successfully act upon the organization and compromise it. This analysis requires both a technical analysis as well as an opportunity analysis (where applicable).
Analysis of tools in use
Any tools that are known to be available to the threat community/agent are to be included here. Additionally, tools that may be freely available should be analyzed for the required skill level needed to be able to utilize them to their potential, and mapped in the threat capability.
Availability to relevant exploits/payloads
The threat community/agent should be analyzed in terms of its capability to either obtain or develop exploits for the environment relevant to the organization. Additionally, accessibility to such exploits/payloads through 3rd parties, business partners, or underground communities should also be to taken into account in this analysis.
An analysis of communication mechanisms available to the threat agent/community should be made to evaluate the complexity of attacks against an organization. These communication mechanisms range from simple and openly available technologies such as encryption, through to specialist tools and services such as bulletproof hosting, use of drop-sites, and the use of known or unknown botnets to perform attacks or mask source information.
The possible motivation of threat agents/communities should be noted for further analysis. Motivations of attackers are constantly changing, as can be seen by the increase in hacktivism branded attacks by groups such as Anonymous and Antisec. There will be subtle differences in unique motivations based on each organization and/or vertical market, some common motivations include :
- Profit (direct or indirect)
- Direct grudge
- Fun / Reputation
- Further access to partner/connected systems
Finding relevant news of comparable Organizations being compromised
In order to provide a complete threat model, a comparison to other organizations within the same industry vertical should be provided. This comparison should include any relevant incidents or news related to such organizations and the challenges they face. Such a comparison is used to validate the threat model and offer a baseline for the organization to compare itself to (taking into account that this publicly available information only represents a portion of the actual threats and incidents the compared organization actually face).